SSブログ

VERITAS Storage Foundation 6.0.1で設定復活 [VERITAS]

えーと、おまじないを唱えます。
# /opt/VRTS/bin/vxdisk path
SUBPATH                     DANAME               DMNAME          GROUP        STATE
sda                         disk_0               -               -            ENABLED
sdb                         disk_1               centos01        centos6      ENABLED
# /opt/VRTS/bin/vxdg import centos6
VxVM vxdg ERROR V-5-1-10978 Disk group cento6: import failed: 
Disk group exists and is imported
お、すでにインポートされているそうな
# /opt/VRTS/bin/vxvol -g centos6 startall
# vi /etc/fstab
fstabにmount pointを追加して、mount pointをmkdirしてmountすれば、きちんと見えるはずです。
私の場合は、見えました:-)

ということで、後はVirtualBoxインストールして、name serverとWindows Serverを立ち上げれば、元に戻ります。
そろそろWindows Serverも2012にしないとな...
もうしばらくWindows Server 2003に頑張ってもらいます:-p

VERITAS Storage Foundation 6.0.1 on CentOS 6.2 [VERITAS]

しょーがないので、今度はCentOS 6.2で再チャレンジです。
素のCentOS 6.2のKernelは2.6.32-220で、最後のupdateは2.6.32-220.23.1です。
yumでこいつを指定しても、既に見つからない様なので、vault.centos.orgから
kernel-2.6.32-220.23.1.el6.x86_64.rpm
kernel-debug-2.6.32-220.23.1.el6.x86_64.rpm
kernel-debug-devel-2.6.32-220.23.1.el6.x86_64.rpm
kernel-devel-2.6.32-220.23.1.el6.x86_64.rpm
kernel-doc-2.6.32-220.23.1.el6.noarch.rpm
kernel-firmware-2.6.32-220.23.1.el6.noarch.rpm
kernel-headers-2.6.32-220.23.1.el6.x86_64.rpm
のパッケージを拾ってきてrpm -Uvhします。

んでもって、インストールしたら
# yum update -y --exclude='kernel*'
して、Kernel以外のパッケージアップデートをした上で、作業再開!
あ、引っかかるものは6.3の時と同じなので、事前にその作業はしておきます。
# ./installer

[snip]

             Veritas Storage Foundation Basic 6.0.1 Install Program             
                                     centos6                                      

Logs are being written to /var/tmp/installer-201211101745BhG while installer is 
in progress

    Installing SF: 0%   ____________________________________________________ 
    Estimated time remaining: (mm:ss) 0:00                          12 of 12

    Performing SF preinstall tasks .................................... Done
    Installing VRTSperl rpm ........................................... Done
    Installing VRTSvlic rpm ........................................... Done
    Installing VRTSspt rpm ............................................ Done
    Installing VRTSvxvm rpm ........................................... Done
    Installing VRTSaslapm rpm ......................................... Done
    Installing VRTSob rpm ............................................. Done
    Installing VRTSvxfs rpm ........................................... Done
    Installing VRTSfsadv rpm .......................................... Done
    Installing VRTSsfmh rpm ........................................... Done
    Installing VRTSsfcpi601 rpm ....................................... Done
    Performing SF postinstall tasks ................................... Done

Veritas Storage Foundation Basic Install completed successfully

Checking system licensing

Storage Foundation Basic successfully registered on centos6
SF is licensed on the systems




             Veritas Storage Foundation Basic 6.0.1 Install Program             
                                     centos6                                      

Logs are being written to /var/tmp/installer-201211101745BhG while installer is 
in progress

    Starting SF: 0%   ______________________________________________________ 
    Estimated time remaining: (mm:ss) 0:00                          11 of 11

    Performing SF configuration ....................................... Done
    Starting vxdmp .................................................... Done
    Starting vxio ..................................................... Done
    Starting vxspec ................................................... Done
    Starting vxconfigd ................................................ Done
    Starting vxesd .................................................... Done
    Starting vxrelocd ................................................. Done
    Starting vxconfigbackupd .......................................... Done
    Starting vxportal ................................................. Done
    Starting fdd ...................................................... Done
    Performing SF poststart tasks ..................................... Done

Veritas Storage Foundation Basic Startup completed successfully


The updates to VRTSaslapm package are released via the Symantec SORT web page: 
https://sort.symantec.com/asl. To make sure you have the latest version of 
VRTSaslapm (for up to date ASLs and APMs), download and install the latest 
package from the SORT web page.

Would you like to send the information about this installation to Symantec to 
help improve installation in the future? [y,n,q,?] (y) n
ふぅ、うまく行ったようです。
ココは、もち「n」で(^^;
Checking online updates for Veritas Storage Foundation Basic 6.0.1

	Available updates for Veritas Storage Foundation Basic 6.0.1:
	    vm-rhel6_x86_64-6.0.1.200
	    fs-rhel6_x86_64-6.0.1.200
	    sfha-rhel6_x86_64-6.0.1

	Please visit https://sort.symantec.com for more information.

installer log files, summary file, and response file are saved at:

	/opt/VRTS/install/logs/installer-201211101745BhG

Would you like to view the summary file? [y,n,q] (n) 

終了(^^)v~

さて、この後、
vm-rhel6_x86_64-6.0.1.200
fs-rhel6_x86_64-6.0.1.200
の2つは
https://sort.symantec.com/
こちらから入手可能なので、拾ってきて、適用します。
# tar xfz vm-rhel6_x86_64-6.0.1.200-rpms.tar.gz
# rpm -Uvhr rpms/VRTSvxvm-6.0.100.200-RHEL6.x86_64.rpm 
Preparing...  ########################################### [100%]
stopping vxrelocd
stopping vxattachd
stopping vxconfigbackupd
stopping vxnotify
stopping vxesd
stopping vxconfigd
   1:VRTSvxvm ########################################### [100%]
Installing file /etc/init.d/vxvm-boot
creating VxVM device nodes under /dev
Installing keys for APMs

# tar xfz ../Veritas/fs-rhel6_x86_64-6.0.1.200-rpms.tar.gz 
# rpm -Uvh rpms/VRTSvxfs-6.0.100.200-RHEL6.x86_64.rpm 
Preparing...  ########################################### [100%]
   1:VRTSvxfs ########################################### [100%]
WARNING:  No modules found for 2.6.32-220.23.1.el6.x86_64, using compatible modules for 2.6.32-71.el6.x86_64.
あ、警告出しやがった...
ま、エラーは出ていないので、とりあえず、これで運用をしてみようと思います。

お次は、既存ボリュームの再認識です。
さて、うまく、見えるかな?

惨敗記録: VERITAS Storage Foundation 6.0.1 on CentOS 6.3 [VERITAS]

まずは、惨敗の記録から...
今回のupdateは首尾良くバックアップを取り、毎度のことながら、何も考えずにCentOS 6.3をclean install。
ココまでは、何の問題も無し。
でもって、VERITAS Storage Foundation 6.0.1をインストール開始です。
# tar xfz VRTS_SF_Basic_6.0.1_Linux.tar.gz 
# cd dvd3-sfbasic/rhel6_x86_64/
# ./installer 

    Storage Foundation and High Availability Solutions 6.0.1 Install Program    

Copyright (c) 2012 Symantec Corporation. All rights reserved.  Symantec, the 
Symantec Logo are trademarks or registered trademarks of Symantec Corporation or
its affiliates in the U.S. and other countries. Other names may be trademarks of
their respective owners.

The Licensed Software and Documentation are deemed to be "commercial computer 
software" and "commercial computer software documentation" as defined in FAR 
Sections 12.212 and DFARS Section 227.7202.

Logs are being written to /var/tmp/installer-201210212207qRX while installer is 
in progress.




    Storage Foundation and High Availability Solutions 6.0.1 Install Program    


Cannot determine product install/license status on system centos6 as its platform 
is CentOS6x8664. Software included in this distribution is intended for systems 
of platform RHEL6x8664.


Task Menu:

    P) Perform a Pre-Installation Check                I) Install a Product
    C) Configure an Installed Product                  G) Upgrade a Product
    O) Perform a Post-Installation Check               U) Uninstall a Product
    L) License a Product                               S) Start a Product
    D) View Product Descriptions                       X) Stop a Product
    R) View Product Requirements                       ?) Help

Enter a Task: [P,I,C,G,O,U,L,S,D,X,R,?] I
インストールなので「I」をチョイス。
    Storage Foundation and High Availability Solutions 6.0.1 Install Program    

Veritas Storage Foundation Basic (SF) is the only product available for 
installation

Do you agree with the terms of the End User License Agreement as specified in 
the storage_foundation_basic/EULA/en/EULA_SF_Basic_Ux_6.0.1.pdf file present on 
media? [y,n,q,?] y
もち「y」です。
             Veritas Storage Foundation Basic 6.0.1 Install Program             

     1)  Install minimal required rpms - 115 MB required
     2)  Install recommended rpms - 271 MB required
     3)  Install all rpms - 272 MB required
     4)  Display rpms to be installed for each option

Select the rpms to be installed on all systems? [1-4,q,?] (2) 3
とりあえず、全部インストールという事で「3」を選んでみました。
Enter the 64 bit RHEL6 system names separated by spaces: [q,?] centos6
システム名はココでは「centos6」としておきます。

             Veritas Storage Foundation Basic 6.0.1 Install Program             
                                     centos6                                      

Logs are being written to /var/tmp/installer-201210212207qRX while installer is 
in progress

    Verifying systems: 0%   ________________________________________________ 
    Estimated time remaining: (mm:ss) 0:15                            2 of 8

    Checking system communication ..................................... Done
    Checking release compatibility .................................... Done

System verification checks completed

The following errors were discovered on the systems:

CPI ERROR V-9-20-1208 This release is intended to operate on RHEL Linux 
distributions but cnetos6 is a CentOS system

installer log files and summary file are saved at:

	/opt/VRTS/install/logs/installer-201210212207qRX

Would you like to view the summary file? [y,n,q] (n)
ありゃりゃ... きちんとRHEL6のチェック、やってるよ...
って事で、まず撃沈。

結構、きちんとチェックしている様で、/etc/redhat-releaseに「CentOS」の文字が残っていてもダメなようです。
なので、
  Red Hat Enterprise Linux 6.3 (Santiago)
とか書き換えておきます。

ということで、再チャレンジ...
# ./installer

[snip]

             Veritas Storage Foundation Basic 6.0.1 Install Program             
                                                                           

Logs are being written to /var/tmp/installer-201210212214fgF while installer is 
in progress

    Verifying systems: 0%   ________________________________________________ 
    Estimated time remaining: (mm:ss) 0:00                            8 of 8

    Checking system communication ..................................... Done
    Checking release compatibility .................................... Done
    Checking installed product ........................................ Done
    Checking prerequisite patches and rpms .......................... Failed
    Checking platform version ......................................... Done
    Checking file system free space ................................... Done
    Checking product licensing ........................................ Done
    Performing product prechecks ...................................... Done

System verification checks completed

The following errors were discovered on the systems:

CPI ERROR V-9-30-2225 The following required OS rpms (or higher version) were 
not found on centos6:
	pam-1.1.1-8.el6.i686 libstdc++-4.4.5-6.el6.i686

installer log files and summary file are saved at:

	/opt/VRTS/install/logs/installer-201210212214fgF

Would you like to view the summary file? [y,n,q] (n)
ありゃりゃ、またエラー... それもパッケージが足りないとは...
ってゆーか、なんで32-bitのパッケージが必要なんだ?

ということで、vault.centos.orgで調べてみると、条件を満たすパッケージは
pam-1.1.1-10.el6_2.1.i686
libstdc++-4.4.6-4.el6.i686
のようです。

しょうがないので
# yum install pam-1.1.1-10.el6_2.1.i686 libstdc++-4.4.6-4.el6.i686

--------------------------------------------------------------------------------
Total                                           2.9 MB/s | 1.7 MB     00:00     
Running rpm_check_debug
Running Transaction Test
Transaction Test Succeeded
Running Transaction
Warning: RPMDB altered outside of yum.
  Installing : db4-4.7.25-17.el6.i686                                       1/6 
  Installing : cracklib-2.8.16-4.el6.i686                                   2/6 
  Installing : libselinux-2.0.94-5.3.el6.i686                               3/6 
  Installing : audit-libs-2.2-2.el6.i686                                    4/6 
  Installing : pam-1.1.1-10.el6_2.1.i686                                    5/6 
  Installing : libstdc++-4.4.6-4.el6.i686                                   6/6 

  Verifying  : audit-libs-2.2-2.el6.i686                                    1/6 
  Verifying  : libselinux-2.0.94-5.3.el6.i686                               2/6 
  Verifying  : cracklib-2.8.16-4.el6.i686                                   3/6 
  Verifying  : libstdc++-4.4.6-4.el6.i686                                   4/6 
  Verifying  : db4-4.7.25-17.el6.i686                                       5/6 
  Verifying  : pam-1.1.1-10.el6_2.1.i686                                    6/6 

Installed:
  libstdc++.i686 0:4.4.6-4.el6            pam.i686 0:1.1.1-10.el6_2.1           

Dependency Installed:
  audit-libs.i686 0:2.2-2.el6          cracklib.i686 0:2.8.16-4.el6             
  db4.i686 0:4.7.25-17.el6             libselinux.i686 0:2.0.94-5.3.el6         

Complete!
気を取り直して、もう一度...
# ./installer

[snip]

Loaded plugins: aliases, changelog, downloadonly, fastestmirror, presto,
              : refresh-packagekit, security, tmprepo, verify, versionlock
Loading mirror speeds from cached hostfile
 * base: www.ftp.ne.jp
 * extras: www.ftp.ne.jp
 * updates: www.ftp.ne.jp
Setting up Install Process
Resolving Dependencies
--> Running transaction check
---> Package libstdc++.i686 0:4.4.6-4.el6 will be installed
---> Package pam.i686 0:1.1.1-10.el6_2.1 will be installed
--> Processing Dependency: libselinux.so.1 for package: pam-1.1.1-10.el6_2.1.i686
--> Processing Dependency: libdb-4.7.so for package: pam-1.1.1-10.el6_2.1.i686
--> Processing Dependency: libcrack.so.2 for package: pam-1.1.1-10.el6_2.1.i686
--> Processing Dependency: libaudit.so.1 for package: pam-1.1.1-10.el6_2.1.i686
--> Running transaction check
---> Package audit-libs.i686 0:2.2-2.el6 will be installed
---> Package cracklib.i686 0:2.8.16-4.el6 will be installed
---> Package db4.i686 0:4.7.25-17.el6 will be installed
---> Package libselinux.i686 0:2.0.94-5.3.el6 will be installed
--> Finished Dependency Resolution

Dependencies Resolved

================================================================================
 Package            Arch         Version                     Repository    Size
================================================================================
Installing:
 libstdc++          i686         4.4.6-4.el6                 base         299 k
 pam                i686         1.1.1-10.el6_2.1            base         656 k
Installing for dependencies:
 audit-libs         i686         2.2-2.el6                   base          60 k
 cracklib           i686         2.8.16-4.el6                base          70 k
 db4                i686         4.7.25-17.el6               base         580 k
 libselinux         i686         2.0.94-5.3.el6              base         108 k

Transaction Summary
================================================================================
Install       6 Package(s)

Total download size: 1.7 M
Installed size: 5.0 M
Is this ok [y/N]: y
Downloading Packages:
Setting up and reading Presto delta metadata
Processing delta metadata
Package(s) data still to download: 1.7 M
(1/6): audit-libs-2.2-2.el6.i686.rpm                     |  60 kB     00:00     
(2/6): cracklib-2.8.16-4.el6.i686.rpm                    |  70 kB     00:00     
(3/6): db4-4.7.25-17.el6.i686.rpm                        | 580 kB     00:00     
(4/6): libselinux-2.0.94-5.3.el6.i686.rpm                | 108 kB     00:00     
(5/6): libstdc++-4.4.6-4.el6.i686.rpm                    | 299 kB     00:00     
(6/6): pam-1.1.1-10.el6_2.1.i686.rpm                     | 656 kB     00:00     

             Veritas Storage Foundation Basic 6.0.1 Install Program             
                                     centos6                                      

Logs are being written to /var/tmp/installer-201210212235HHD while installer is 
in progress

    Verifying systems: 0%   ________________________________________________ 
    Estimated time remaining: (mm:ss) 0:00                            8 of 8

    Checking system communication ..................................... Done
    Checking release compatibility .................................... Done
    Checking installed product ........................................ Done
    Checking prerequisite patches and rpms ............................ Done
    Checking platform version ......................................... Done
    Checking file system free space ................................... Done
    Checking product licensing ........................................ Done
    Performing product prechecks ...................................... Done

System verification checks completed successfully



             Veritas Storage Foundation Basic 6.0.1 Install Program             
                                     centos6                                      

The following Veritas Storage Foundation Basic rpms will be installed on all 
systems:

Rpm               Rpm Description

VRTSperl          Veritas Perl 5.14.2 Redistribution
VRTSvlic          Veritas Licensing
VRTSspt           Veritas Software Support Tools by Symantec
VRTSvxvm          Veritas Volume Manager Binaries
VRTSaslapm        Veritas Volume Manager - ASL/APM
VRTSob            Veritas Enterprise Administrator Service by Symantec
VRTSlvmconv       Veritas Linux LVM to VxVM Converter
VRTSvxfs          Veritas File System
VRTSfsadv         Veritas File System Advanced Solutions by Symantec
VRTSfssdk         Veritas File System Software Developer Kit
VRTSsfmh          Veritas Storage Foundation Managed Host by Symantec
VRTSsfcpi601      Veritas Storage Foundation Installer

Press [Enter] to continue: 
素直にEnterを押します。
             Veritas Storage Foundation Basic 6.0.1 Install Program             
                                     centos6                                      

Logs are being written to /var/tmp/installer-201210212235HHD while installer is 
in progress

    Installing SF: 0%   ____________________________________________________ 
    Estimated time remaining: (mm:ss) 0:00                          14 of 14

    Performing SF preinstall tasks .................................... Done
    Installing VRTSperl rpm ........................................... Done
    Installing VRTSvlic rpm ........................................... Done
    Installing VRTSspt rpm ............................................ Done
    Installing VRTSvxvm rpm ........................................... Done
    Installing VRTSaslapm rpm ......................................... Done
    Installing VRTSob rpm ............................................. Done
    Installing VRTSlvmconv rpm ........................................ Done
    Installing VRTSvxfs rpm ......................................... Failed
    Installing VRTSfsadv rpm .......................................... Done
    Installing VRTSfssdk rpm .......................................... Done
    Installing VRTSsfmh rpm ........................................... Done
    Installing VRTSsfcpi601 rpm ....................................... Done
    Performing SF postinstall tasks ................................... Done

Veritas Storage Foundation Basic Install did not complete successfully

VRTSvxfs rpm failed to install on centos6

rpms/patches failed to install. Do you want to exit installer? [y,n,q] (y) n
肝心のvxfsがエラーになってます(;_;)
が、めげずに進めてみました。
Checking system licensing

Storage Foundation Basic successfully registered on centos6
SF is licensed on the systems




             Veritas Storage Foundation Basic 6.0.1 Install Program             
                                     centos6                                      

Logs are being written to /var/tmp/installer-201210212235HHD while installer is 
in progress

    Starting SF: 0%   ______________________________________________________ 
    Estimated time remaining: (mm:ss) 0:00                            9 of 9

    Performing SF configuration ....................................... Done
    Starting vxdmp .................................................... Done
    Starting vxio ..................................................... Done
    Starting vxspec ................................................... Done
    Starting vxconfigd ................................................ Done
    Starting vxesd .................................................... Done
    Starting vxrelocd ................................................. Done
    Starting vxconfigbackupd .......................................... Done
    Performing SF poststart tasks ..................................... Done

Veritas Storage Foundation Basic Startup completed successfully


The updates to VRTSaslapm package are released via the Symantec SORT web page: 
https://sort.symantec.com/asl. To make sure you have the latest version of 
VRTSaslapm (for up to date ASLs and APMs), download and install the latest 
package from the SORT web page.

Would you like to send the information about this installation to Symantec to 
help improve installation in the future? [y,n,q,?] (y) n
「n」を選択しておきます。
Checking online updates for Veritas Storage Foundation Basic 6.0.1

	Available updates for Veritas Storage Foundation Basic 6.0.1:
	    vm-rhel6_x86_64-6.0.1.200
	    fs-rhel6_x86_64-6.0.1.200
	    sfha-rhel6_x86_64-6.0.1

	Please visit https://sort.symantec.com for more information.

installer log files, summary file, and response file are saved at:

	/opt/VRTS/install/logs/installer-201210212235HHD

Would you like to view the summary file? [y,n,q] (n)
うみゅー
vxfsのパッケージをインストールし直してみたところ、どうやらKernelのsymbolが無いとかでエラーになってる見たいです。
RHEL 6.3とCentOS 6.3の違いかと思ったのですが
http://www.symantec.com/connect/forums/vxfs-fails-after-update-rhel-63
これ見ると、RHEL 6.3でも同じみたい。

どうやらインストールログの最後に出てたアップデートパッケージの
sfha-rhel6_x86_64-6.0.1
こいつが手に入れば6.3でもOKの様ですが、これ、タダでは入手出来ないようですorz

ということで、CentOS 6.3使えません... 個人的に。
Symantecさん、Storage Foundation Basicでも6.3に対応してくださいな!

VxVMカプセル化の不思議 on CentOS [VERITAS]

気が向いたので、VxVMでRHEL系の起動ディスクをカプセル化できるか試してみました。
まず、RHEL系の通常のパーティションマップでは、カプセル化出来ないとマニュアルに書いてありますし、vxdiskadmで対話的に進めていってもエラーになります。
ま、簡単なのは、/bootと/を基本パーティションとして、swapを拡張パーティションの中に作るようにする事です。
が、CentOSのインストーラーは、基本パーティションのチェックを外しておいても拡張パーティションにしてくれません。
んなわけで、GPartedとか使って、一旦swapを削除の上、拡張パーティション中にswapを作ります。
あと、空きの領域を設けておく必要があります。

でもって、この状態で起動してvxdiskadmで作業を進めるのですが、カプセル化の作業が終わって、shutdown -r nowしろというから、したが最後、VxVM_initrd.imgが見つからないとか言われて、起動できなくなります。
こうなると、インストールメディアでlinux rescueで立ち上げても、元に戻せません(;_;)
まVMで試しているので、どーでも良いのですが。

で、もう一度、気を取り直して最初から試して、今度はrebootする前に
mkinitrd -f /boot/VxVM_initrd.img `uname -r`
して、ものを作っておきました。
何とか立ち上がり、/のカプセル化が終わって、勝手にrebootするのですが、今度は/dev/rootが見つからないとか、色々言われてKernel panicで落ちました(T_T)

結局、起動ディスクは、カプセル化出来ないって、事でしょうかねぇ...
今度はSolarisで試してみます。

VERITAS Storage Foundation 5.1へUpdate [VERITAS]

最近、Sambaのプロセスが、I/O blockされて、異常繁殖した結果、サービス不能になる事が多いので、どうもその元となってそうなVERITAS Storage Foundationをupdateすることにしました。

元のファイルは
VRTS_SF_HA_Solutions_5.1_RHEL.tar.gz
です。
Symantecさんで登録してあればdownload出来るのは、以前と同じです。
# tar xfz VRTS_SF_HA_Solutions_5.1_RHEL.tar.gz
# cd dvd1-redhatlinux/rhel5_x86_64
まずはここにある、readme_firest.txtを眺めてみます。
ふむふむ
http://entsupport.symantec.com/docs/335001
みてみろと。
みたら、Patch 1の情報が書いてあります。
の前に、Disk Layout Versionの古いのはサポートしないと書いてあります。
調べ方は
http://entsupport.symantec.com/docs/339064
に書いてありますが
# /opt/VRTS/bin/fstyp -v /dev/vx/dsk/<rootdg>/<volname> | grep version
すればわかります。
あ、rootdgとvolnameは、利用環境に合わせて入力します。
少なくとも5.0から使い始めたのであれば、Version 7のはずなので、なんら問題ありません。

ということで、まずはコマンド使ってチェックしてみましょう。
# ./installer -precheck

    Storage Foundation and High Availability Solutions 5.1 Precheck Program    
                                                                               

Copyright (c) 2009 Symantec Corporation. All rights reserved.  Symantec, the
Symantec Logo are trademarks or registered trademarks of Symantec
Corporation or its affiliates in the U.S. and other countries. Other names
may be trademarks of their respective owners.

The Licensed Software and Documentation are deemed to be "commercial
computer software" and "commercial computer software documentation" as
defined in FAR Sections 12.212 and DFARS Section 227.7202.

Logs are being written to /var/tmp/installer-200912272042CCz while installer
is in progress.


    Storage Foundation and High Availability Solutions 5.1 Precheck Program    
                                                                               

     1)  Veritas Cluster Server (VCS)
     2)  Storage Foundation (SF)
     3)  Storage Foundation and High Availability (SFHA)
     4)  Storage Foundation for Cluster File System (SFCFS)
     5)  Storage Foundation for Cluster File System/HA (SFCFSHA)
     6)  Storage Foundation Cluster File System for Oracle RAC (SFCFS Oracle RAC)
     7)  Symantec Product Authentication Service (AT)
     b)  Back to previous menu

Select a product to perform pre-installation check for: [1-7,b,q] 2
素直に「2」をチョイスします。
Enter the 64 bit RHEL5 system names separated by spaces: [q,?] (ROOTDG) 
ここはデフォルトのまんま
                    Storage Foundation 5.1 Precheck Program                    
                                       ROOTDG                                     

Logs are being written to /var/tmp/installer-200912272042CCz while installer
is in progress

    Verifying systems: 100%   ________________________________________________ 

     Estimated time remaining: 0:00                                    8 of 8

    Checking system communication ..................................... Done
    Checking release compatibility .................................... Done
    Checking installed product ........................................ Done
    Checking installed patches ........................................ Done
    Checking platform version ......................................... Done
    Checking file space ............................................... Done
    Performing product license checks ................................. Done
    Performing product prechecks ...................................... Done

Precheck report completed

System verification checks completed successfully

No issues found in prechecks

Would you like to install SF on ROOTDG [y,n,q] (n) 
思った通り、何も問題なしなので、このまま進みたいところですが、デフォルト通り、インストールせずに、終了させましょう。
インストールしても、何も変わりません。
パッチを当てようとして、何も変わってないことに気がつくだけです。
はい。
でもって、もう一回、オプション無しでインストーラーを起動する前に、vxvm管轄下のエリアにアクセスしているプロセスを全て落とし、unmountします。
その上で、インストーラーを起動します。
# ./installer

     Storage Foundation and High Availability Solutions 5.1 Install Program     
                                                                               

Copyright (c) 2009 Symantec Corporation. All rights reserved.  Symantec, the
Symantec Logo are trademarks or registered trademarks of Symantec
Corporation or its affiliates in the U.S. and other countries. Other names
may be trademarks of their respective owners.

The Licensed Software and Documentation are deemed to be "commercial
computer software" and "commercial computer software documentation" as
defined in FAR Sections 12.212 and DFARS Section 227.7202.

Logs are being written to /var/tmp/installer-200912272156vEs while installer
is in progress.


     Storage Foundation and High Availability Solutions 5.1 Install Program     
                                                                               

Symantec Product                                 Version Installed  Licensed
==============================================================================
Veritas File System                              5.0.30.00          yes
Veritas Volume Manager                           5.0.30.03          yes
Veritas Cluster Server                           none               no
Storage Foundation                               5.0.30.03          yes
Storage Foundation for Cluster File System       none               no
Storage Foundation Cluster File System for Oracle RAC  none               no
Symantec Product Authentication Service          4.3.34.4           no

Task Menu:

    P) Perform a Pre-Installation Check       I) Install a Product
    C) Configure an Installed Product         G) Upgrade a Product
    L) License a Product                      U) Uninstall a Product
    D) View a Product Description             S) Start a Product
    R) View Product Requirements              X) Stop a Product
    Q) Quit                                   ?) Help

Enter a Task: [P,I,C,G,L,U,D,S,R,X,Q,?] G
もち、Upgradeの「G」です。
Do you agree with the terms of the End User License Agreement as specified
in the EULA.pdf file present on media? [y,n,q,?] y
読んで納得して「y」と答えましょう。
Enter the 64 bit RHEL5 system names separated by spaces: [q,?] (ROOTDG) 
ここはデフォルトのまんま
     Storage Foundation and High Availability Solutions 5.1 Upgrade Program     
                                       ROOTDG                                     

Logs are being written to /var/tmp/installer-200912272156vEs while installer
is in progress

    Verifying systems: 100%   ________________________________________________ 

    Estimated time remaining: 0:00                                    8 of 8

    Checking system communication ..................................... Done
    Checking release compatibility .................................... Done
    Checking installed product ........................................ Done
    Checking installed patches ........................................ Done
    Checking platform version ......................................... Done
    Checking file space ............................................... Done
    Performing product license checks ................................. Done
    Performing product prechecks ...................................... Done

System verification checks completed successfully


                     Storage Foundation 5.1 Upgrade Program                     
                                       ROOTDG                                     

The following Storage Foundation rpms will be installed or upgraded on all
systems:
VRTSvlic          Veritas Licensing
VRTSperl          Veritas Perl 5.10.0 Redistribution
VRTSspt           Veritas Software Support Tools by Symantec
VRTSob            Veritas Enterprise Administrator Service by Symantec
VRTSvxvm          Veritas Volume Manager Binaries
VRTSaslapm        Volume Manager - ASL/APM
VRTSlvmconv       Veritas Linux LVM to VxVM Converter
VRTSsfmh          Veritas Storage Foundation Managed Host by Symantec
VRTSvxfs          Veritas File System
VRTSfssdk         Veritas File System Software Developer Kit
VRTSdbed          Veritas Storage Foundation Databases
VRTSodm           Veritas Oracle Disk Manager
VRTSatClient      Symantec Product Authentication Service Client
VRTSatServer      Symantec Product Authentication Service

Press [Enter] to continue: 
もち「Enter」
All SF processes that are currently running must be stopped

Do you want to stop SF processes now? [y,n,q,?] (y) 
もちデフォルト

                     Storage Foundation 5.1 Upgrade Program                     
                                       ROOTFG                                     

Logs are being written to /var/tmp/installer-200912272156vEs while installer
is in progress

    Stopping SF: 100%   ______________________________________________________ 

    Estimated time remaining: 0:00                                  18 of 18

    Performing SF prestop tasks ....................................... Done
    Stopping vxsvc .................................................... Done
    Stopping vxdclid .................................................. Done
    Stopping xprtld ................................................... Done
    Stopping vxpal .................................................... Done
    Stopping vxatd .................................................... Done
    Stopping fdd ...................................................... Done
    Stopping vxportal ................................................. Done
    Stopping vxfs ..................................................... Done
    Stopping vxconfigbackupd .......................................... Done
    Stopping vxsited .................................................. Done
    Stopping vxrelocd ................................................. Done
    Stopping vxnotify ................................................. Done
    Stopping vxesd .................................................... Done
    Stopping vxconfigd ................................................ Done
    Stopping vxspec ................................................... Done
    Stopping vxio ..................................................... Done
    Stopping vxdmp .................................................... Done

Storage Foundation Shutdown completed successfully


                     Storage Foundation 5.1 Upgrade Program                     
                                       ROOTDG                                     

Logs are being written to /var/tmp/installer-200912272156vEs while installer
is in progress

    Uninstalling SF: 100%   __________________________________________________ 

    Estimated time remaining: 0:00                                  38 of 38

    Uninstalling VRTSfssdk ............................................ Done
    Uninstalling VRTSfsdoc ............................................ Done
    Uninstalling VRTSfsman ............................................ Done
    Uninstalling VRTSalloc ............................................ Done
    Uninstalling VRTSdcli ............................................. Done
    Uninstalling VRTSvsvc ............................................. Done
    Uninstalling VRTSvmpro ............................................ Done
    Uninstalling VRTSddlpr ............................................ Done
    Uninstalling VRTSvdid ............................................. Done
    Uninstalling VRTSlvmconv .......................................... Done
    Uninstalling VRTSvmdoc ............................................ Done
    Uninstalling VRTSvmman ............................................ Done
    Uninstalling SYMClma .............................................. Done
    Uninstalling VRTSspt .............................................. Done
    Uninstalling VRTSaa ............................................... Done
    Uninstalling VRTSmh ............................................... Done
    Uninstalling VRTSccg .............................................. Done
    Uninstalling VRTSobgui ............................................ Done
    Uninstalling VRTSfspro ............................................ Done
    Uninstalling VRTSdsa .............................................. Done
    Uninstalling VRTSob ............................................... Done
    Uninstalling VRTSobc33 ............................................ Done
    Uninstalling VRTSsmf .............................................. Done
    Uninstalling VRTSpbx .............................................. Done
    Uninstalling VRTSicsco ............................................ Done
    Uninstalling VRTSvxfs ............................................. Done
    Uninstalling VRTSvxfs-platform .................................... Done
    Uninstalling VRTSvxfs-common ...................................... Done
    Uninstalling VRTSvxvm ............................................. Done
    Uninstalling VRTSvxvm-platform .................................... Done
    Uninstalling VRTSvxvm-common ...................................... Done
    Uninstalling VRTSperl ............................................. Done
    Uninstalling VRTSvlic ............................................. Done
    Performing SF postremove tasks .................................... Done

Storage Foundation Uninstall completed successfully


                     Storage Foundation 5.1 Upgrade Program                     
                                       ROOTDG                                     

Logs are being written to /var/tmp/installer-200912272156vEs while installer
is in progress

    Installing SF: 100%   ____________________________________________________ 

    Estimated time remaining: 0:00                                  18 of 18

    Performing SF preinstall tasks .................................... Done
    Installing VRTSvlic rpm ........................................... Done
    Installing VRTSperl rpm ........................................... Done
    Installing VRTSspt rpm ............................................ Done
    Installing VRTSob rpm ............................................. Done
    Installing VRTSvxvm rpm ........................................... Done
    Installing VRTSaslapm rpm ......................................... Done
    Installing VRTSlvmconv rpm ........................................ Done
    Installing VRTSsfmh rpm ........................................... Done
    Installing VRTSvxfs rpm ........................................... Done
    Installing VRTSfssdk rpm .......................................... Done
    Installing VRTSdbed rpm ........................................... Done
    Installing VRTSodm rpm ............................................ Done
    Installing VRTSatClient rpm ....................................... Done
    Installing VRTSatServer rpm ....................................... Done
    Performing SF postinstall tasks ................................... Done
    Checking SF licenses .............................................. Done
    Copying installer libraries and scripts ........................... Done

Storage Foundation Install completed successfully


                     Storage Foundation 5.1 Upgrade Program                     
                                       ROOTDG                                     

Logs are being written to /var/tmp/installer-200912272156vEs while installer
is in progress

    Starting SF: 100%   ______________________________________________________ 

    Estimated time remaining: 0:00                                  13 of 13

    Performing SF upgrade configuration ............................... Done
    Starting vxdmp .................................................... Done
    Starting vxio ..................................................... Done
    Starting vxspec ................................................... Done
    Starting vxconfigd ................................................ Done
    Starting vxesd .................................................... Done
    Starting vxrelocd ................................................. Done
    Starting vxconfigbackupd .......................................... Done
    Starting vxportal ................................................. Done
    Starting fdd ...................................................... Done
    Starting vxdbd .................................................... Done
    Starting vxodm .................................................... Done
    Performing SF poststart tasks ..................................... Done

Storage Foundation Startup completed successfully

Would you like to send the information about this installation to Symantec
to help improve installation in the future? [y,n,q,?] (y) n
送らないので「n」
installer log files, summary file, and response file are saved at:

 	/opt/VRTS/install/logs/installer-200912272156vEs
これでおしまい。
念のために、もう一度起動して、バージョンをチェック!
# ./installer
一部省略...

     Storage Foundation and High Availability Solutions 5.1 Install Program     
                                                                               

Symantec Product                                 Version Installed  Licensed
==============================================================================
Veritas File System                              5.1.00.00          yes
Veritas Volume Manager                           5.1.00.00          yes
Veritas Cluster Server                           none               no
Storage Foundation                               5.1.00.00          yes
Storage Foundation for Cluster File System       none               no
Storage Foundation Cluster File System for Oracle RAC  none               no
Symantec Product Authentication Service          5.0.32.0           no
はい、きちんとバージョンアップ完了です。
続いて、パッチ当て。
# mkdir Patch1
# cd Patch1
# tar xfz <path>/sfha-rhel5_x86_64-5.1P1-rpms.tar.gz
ここで展開されたsfha_readfirst.pdfを読んでおきましょう。
読んだことにして、先に進みます(^^;
# cd rpms
# rpm -Uvh --force VRTSspt-5.5.00.0-GA.noarch.rpm
# rpm -Uvh --force VRTSvxvm-5.1.00.01-P1_RHEL5.x86_64.rpm
# rpm -Uvh --force VRTSaslapm-5.1.00.01-P1_RHEL5.x86_64.rpm
# rpm -Uvh --force VRTSlvmconv-5.1.00.01-P1_RHEL5.i686.rpm
# rpm -Uvh --force VRTSvxfs-5.1.00.01-P1_RHEL5.x86_64.rpm
# rpm -Uvh --force VRTSfssdk-5.1.00.01-P1_RHEL5.x86_64.rpm
# rpm -Uvh --force VRTSllt-5.1.00.01-P1_RHEL5.x86_64.rpm
# rpm -Uvh --force VRTSgab-5.1.00.01-P1_RHEL5.x86_64.rpm
# rpm -Uvh --force VRTSvcs-5.1.00.01-P1_RHEL5.i686.rpm
# rpm -Uvh --force VRTScps-5.1.00.01-P1_RHEL5.i686.rpm
# rpm -Uvh --force VRTSvcsag-5.1.00.01-P1_RHEL5.i686.rpm
# rpm -Uvh --force VRTSvcsea-5.1.00.01-P1_RHEL5.i686.rpm
# rpm -Uvh --force VRTScavf-5.1.00.01-P1_GENERIC.i386.rpm
もう一度バージョンをチェック!
# cd ../..
# ./installer
一部省略...

     Storage Foundation and High Availability Solutions 5.1 Install Program     
                                                                               

Symantec Product                                 Version Installed  Licensed
==============================================================================
Veritas File System                              5.1.00.01          yes
Veritas Volume Manager                           5.1.00.01          yes
Veritas Cluster Server                           5.1.00.01          no
Storage Foundation                               5.1.00.01          yes
Storage Foundation for Cluster File System       5.1.00.01          no
Storage Foundation Cluster File System for Oracle RAC  5.1.00.01          no
Symantec Product Authentication Service          5.0.32.0           no
ということで、無事終了。

VERITAS Storage Foundation Basic: パッチ当て編 [VERITAS]

とりあえず、復旧したので、ゴミ掃除+パッチ当てをしてますが、VERITAS Storage Foundation Basicにも忘れず、パッチ当て。

vm-rhel5_x86_64-5.0MP3HF3-rpms.tar_308172.gz

こんなんでてます。
HF3ってことでHot Fix 3です。

適用は、すべてのvolumeのI/Oを停止させて行う必要があるので、single user modeで適用するのがよろしいかと。
なんだけどinit 1で落とすだけだとvxiodが生き残ったままだったりするので、single user modeで立ち上げ直すのが、楽ちんです。
# tar xfz vm-rhel5_x86_64-5.0MP3HF3-rpms.tar_308172.gz
# cd rpms
# rpm -ev --nodeps VRTSvxvm-platform
# rpm -ev --nodeps VRTSvxvm-common
# rpm -ihv VRTSvxvm-common-5.0.30.03-MP3HF3_RHEL5.i686.rpm
# rpm -ihv VRTSvxvm-platform-5.0.30.03-MP3HF3_RHEL5.x86_64.rpm

このままCtrl-Dでsingle user modeから抜けてしまうと、どうもうまくvolumeを認識できないようで、fsckでエラーになってしまいます。
ん~、いいかげんにやるとダメですねぇ(^^;

えーと、vxinstallを実行する必要があるそうです。
パッチのページにきちんと書いてあります:-p
https://vias.symantec.com/labs/vpcs/vpcs/patchinfo/1249
ちなみに、よーく読むと、Basicは適用対象じゃないような... ま、いっか。
# /usr/sbin/vxinstall 

  VxVM uses license keys to control access to some features.  You must have
  an installed, valid license key to make use of these features.  See
  documentation for more details.

  Licensing information:
    System host ID: XXXXXXXX
    Host type: x86_64

Some licenses are already installed.  Do you wish to review them
[y,n,q,?] (default: y) 

Symantec License Manager vxlicrep utility version 3.02.33.0
Copyright (C) 1996-2007 Symantec Corporation. All rights reserved.

Creating a report on all VERITAS products installed on this system

 -----------------***********************-----------------

   License Key                         = XXXX-XXXX-XXXX-XXXX-XXXX-XXXX-XXXX-XXX
   Product Name                        = VERITAS Volume Manager
   Serial Number                       = XXXXX
   License Type                        = PERMANENT
   OEM ID                              = 100
   Point Product                       = YES

 Features := 

   Storage Expert                      = Enabled
   VxVM                                = Enabled
   CPU Count                           = Not Restricted                     
   PGR                                 = Enabled
   Platform                            = Linux                              
   Version                             = 5.0                                
   Maximum number of volumes           = 4 Volumes                          


 -----------------***********************-----------------

   License Key                         = XXXX-XXXX-XXXX-XXXX-XXXX-XXXX-X
   Product Name                        = VERITAS File System
   Serial Number                       = XXXXX
   License Type                        = PERMANENT
   OEM ID                              = 100
   Point Product                       = YES

 Features := 
   VXFS                                = Enabled
   QLOG                                = Enabled

   CPU Count                           = Not Restricted                     
   Platform                            = Linux                              
   Version                             = 5.0                                
   Maximum number of file systems      = 4 File Systems                     


 -----------------***********************-----------------

   License Key                         = XXXX-XXXX-XXXX-XXXX-XXXX-XXXX-XXX
   Product Name                        = VERITAS Storage Foundation Basic
   Serial Number                       = XXXXX
   License Type                        = PERMANENT
   OEM ID                              = 100
   Editions Product                    = YES

 Features := 
   VxVM#VERITAS Volume Manager         = Enabled
   CPU Count#VERITAS Volume Manager    = Not Restricted 
   VXFS#VERITAS File System            = Enabled
   CPU Count#VERITAS File System       = Not Restricted 
   QLOG#VERITAS File System            = Enabled
   PGR#VERITAS Volume Manager          = Enabled
   VERITAS Storage Foundation Basic    = Enabled

   Storage Expert#VERITAS Volume Manager = Enabled
   Platform                            = Linux                              
   Version                             = 5.0                                
   Maximum number of volumes#VERITAS Volume Manager = 4 Volumes
   Maximum number of file systems#VERITAS File System = 4 File Systems


 -----------------***********************-----------------

   Product Name                        = VERITAS Volume Manager
   License Type                        = PERMANENT

 Features := 
   Dynamic Lun Expansion               = Enabled
   Hardware assisted copy              = Enabled
   Cross-platform Data Sharing         = Enabled
   PGR                                 = Enabled
   PGR_TRAINING                        = Enabled
   RAID5SNAP                           = Enabled



 -----------------***********************-----------------

   Product Name                        = VERITAS File System
   License Type                        = PERMANENT

 Features := 
   File Change Log                     = Enabled
   Cross-platform Data Sharing         = Enabled
   Extra-Big File Systems              = Enabled
   Multi-Volume Support                = Enabled



Do you wish to enter a license key [y,n,q,?] (default: n) 

 Do you want to use enclosure based names for all disks ? 
[y,n,q,?] (default: n) y ←元々enclosure based nameを採用していたので、もちy

Do you want to setup a system wide default disk group?
[y,n,q,?] (default: y)  ←デフォルト通りセットアップに入りましょう。

Which disk group [,list,q,?] XXXX ←元々のdisk group名を設定しましょう!
  Starting the relocation daemon, vxrelocd.
  Starting the auto site reattach daemon, vxsited.
  Starting the cache daemon, vxcached.

    Starting the dg monitoring deamon, vxvvrsecdgd.
  Starting the diskgroup config backup daemon, vxconfigbackupd.

  The installation is successfully completed.

これでおしまい。念のために、vxdiskadmでlistを確認。
DEVICE       DISK         GROUP        STATUS
disk_0       XXXX01       XXXX         online
disk_1       -            -            online invalid

めでたし、めでたし。

VERITAS Storage Foundation Basic: トラブル編 [VERITAS]

今回のCentOS 5.xへのアップデートに纏わるトラブルの中で、一番焦ったのが、コレ。
なんてったって、無謀にも全くバックアップとってませんでした(^^;
まあ、サイズがでかいというのはあるのですが、正直、Windows側の広大な領域にコピーするのを、忘れた... というのが、オチです。しょうもない。

で、どうやら、今回のトラブルは、LVMのVolume Groupをactivateしたのが、発端っぽい。
lvm vgchange -a y
したおかげで、/dev/sda8に割り当てられていたVxVMの領域まで、LVMの管理領域に入ってしまったらしい。で、どうなるかというと...

VERITAS Storage Foundation Basicを再インストールしても、Volumeを認識できない...

といった具合です。
かなり冷や汗もの。
具体的には、こんな感じ。
/opt/VRTS/bin/vxdisk path
SUBPATH                     DANAME               DMNAME       GROUP        STATE
sda                         disk_0               -            -            ENABLED
sdb                         disk_1               -            -            ENABLED
vxdiskadmで見てみると...
Select disk devices to add: [,list,q,?] list

DEVICE       DISK         GROUP        STATUS
disk_0       -            -            LVM
disk_1       -            -            online invalid

うお~、LVMになってる!?
というわけです。
しょうがないので、コマンド知らないから、system-config-lvmを起動して、LVMの管理下から/dev/sda8を解放してあげました。

これで、めでたく、復旧です。
みなさん、ストレスに耐える練習する以外は、きちんとバックアップを取ってから作業しましょう。

今回、私は、2回も連続して、バックアップ無しの無謀なOS updateにチャレンジして、2回とも復旧作業に無駄な時間を費やすことになりました。
まあ、悪いことばかりでは無く、ストレス耐性レベルはあがるし、こういう時だからこそ、全知全能?を費やして、復旧策を探しまくるので、色々おまけの知識が吸収できたりするのですが、お勧めは出来ません。

何はともあれ、これで1,2年はシステムを変えない限り平和に過ごせそうです:-)

VERITAS Storage Foundation Basic: アップデート編 [VERITAS]

さて、しばらく間が開きましたが、アップデート編です。
前回の「VERITAS Storage Foundation Basic: 設定編」の後、この説明の間にやっている事は2つ。
・移行確認用に、確保ボリュームにデータを置く
・CentOS 4.xを5.xへアップデートする
これだけです。

OSのアップデート直後、もちろんVxVM管理領域はmountされていません。
# df -kH
Filesystem             Size   Used  Avail Use% マウント位置
/dev/mapper/VolGroup00-LogVol00
                        12G   6.1G   4.9G  56% /
/dev/sda1              104M    13M    86M  13% /boot
none                   262M      0   262M   0% /dev/shm

パッケージはそのまま(削除される訳ではない)なので、
# /opt/VRTS/bin/vxdisk path
VxVM vxdisk ERROR V-5-1-684 IPC failure: Configuration daemon is not accessible
と、冷たい答えが返ってくるだけです。
そんな訳で、再度インストーラーを起動して...
           Storage Foundation and High Availability Solutions 5.0MP3           

Symantec Product                  Version Installed  Licensed
==============================================================================
Storage Foundation Basic                                      5.0.30.00  yes

Task Menu:

I) Install/Upgrade a Product                  C) Configure an Installed Product
L) License a Product                          P) Perform a Pre-Installation Check
U) Uninstall a Product                        D) View a Product Description
Q) Quit                                       ?) Help

Enter a Task: [I,C,L,P,U,D,Q,?] U
アンインストールしてみます。
ちなみに、「I」を選択してアップデートしてみても、「C」を選択して再構成してみても使えません。
まあ、マニュアルもろくすった読まずに(^^;作業しているので、本当は対処のしようが有るのかもしれませんが、せっかくのお試し環境なので、何でも有りです:-)
           Storage Foundation and High Availability Solutions 5.0MP3           

     1)  Storage Foundation Basic (SF Basic)
     b)  Back to previous menu

Select a product to uninstall [1-1,b,q] 1
覚悟を決めたので、迷わず「1」です。
Enter the system names separated by spaces on which to uninstall SF Basic: centos
今回のサンプルではシステム名はホスト名と同じにしてあるので「centos」を入力します。
Initial system check:

    Checking SF Basic installation on centos .................... 5.0.30.00


           Storage Foundation and High Availability Solutions 5.0MP3           

Checking system licensing


           Storage Foundation and High Availability Solutions 5.0MP3           

Checking installed rpms on centos
installer is now ready to uninstall SF Basic.
All SF Basic processes that are currently running must be stopped.

Are you sure you want to uninstall SF Basic? [y,n,q] (y) 
しつこく聞かれますが、ここは黙って「Enter」です。
Cannot check for open volumes on centos because the vxconfigd process is not
in enabled mode.  You must affirm that there are no open volumes if you want
to continue.

Are there any open volumes on centos [y,n,q] (n) 
OSアップデート直後であれば、volumeを開いている事はあり得ないので、ここも黙って「Enter」。
    Checking for patch(1) rpm on centos ........... version 2.5.4 installed


           Storage Foundation and High Availability Solutions 5.0MP3           

Logs for installer are temporarily being created in
/var/tmp/installer-jxZl0h.



    Stopping SF Basic: 0%   _____________________________________________
    Stopping SF Basic: 5%     ___________________________________________
    Stopping SF Basic: 10%      _________________________________________
    Stopping SF Basic: 15%        _______________________________________
    Stopping SF Basic: 20%           ____________________________________
    Stopping SF Basic: 25%             __________________________________
    Stopping SF Basic: 30%               ________________________________
    Stopping SF Basic: 35%                 ______________________________
    Stopping SF Basic: 40%                    ___________________________
    Stopping SF Basic: 45%                      _________________________
    Stopping SF Basic: 50%                        _______________________
    Stopping SF Basic: 55%                          _____________________
    Stopping SF Basic: 60%                             __________________
    Stopping SF Basic: 65%                               ________________
    Stopping SF Basic: 70%                                 ______________
    Stopping SF Basic: 75%                                   ____________
    Stopping SF Basic: 80%                                      _________
    Stopping SF Basic: 85%                                        _______
    Stopping SF Basic: 90%                                          _____
    Stopping SF Basic: 95%                                            ___
    Stopping SF Basic: 100%                                                

Stopping processes completed successfully on all systems


           Storage Foundation and High Availability Solutions 5.0MP3           

Logs for installer are temporarily being created in
/var/tmp/installer-jxZl0h.



    Uninstalling SF Basic: 0%   _________________________________________
    Uninstalling SF Basic: 3%    ________________________________________
    Uninstalling SF Basic: 6%     _______________________________________
    Uninstalling SF Basic: 9%      ______________________________________
    Uninstalling SF Basic: 12%      _____________________________________
    Uninstalling SF Basic: 16%        ___________________________________
    Uninstalling SF Basic: 19%         __________________________________
    Uninstalling SF Basic: 22%           ________________________________
    Uninstalling SF Basic: 25%            _______________________________
    Uninstalling SF Basic: 29%             ______________________________
    Uninstalling SF Basic: 32%               ____________________________
    Uninstalling SF Basic: 35%                ___________________________
    Uninstalling SF Basic: 38%                 __________________________
    Uninstalling SF Basic: 41%                  _________________________
    Uninstalling SF Basic: 45%                    _______________________
    Uninstalling SF Basic: 48%                     ______________________
    Uninstalling SF Basic: 51%                      _____________________
    Uninstalling SF Basic: 54%                        ___________________
    Uninstalling SF Basic: 58%                         __________________
    Uninstalling SF Basic: 61%                           ________________
    Uninstalling SF Basic: 64%                            _______________
    Uninstalling SF Basic: 67%                             ______________
    Uninstalling SF Basic: 70%                              _____________
    Uninstalling SF Basic: 74%                                ___________
    Uninstalling SF Basic: 77%                                 __________
    Uninstalling SF Basic: 80%                                  _________
    Uninstalling SF Basic: 83%                                    _______
    Uninstalling SF Basic: 87%                                     ______
    Uninstalling SF Basic: 90%                                      _____
    Uninstalling SF Basic: 93%                                        ___
    Uninstalling SF Basic: 96%                                         __
    Uninstalling SF Basic: 100%                                          

Uninstall completed successfully on all systems
Uninstallation log files, summary file, and response file are saved at:

 	/opt/VRTS/install/logs/installer-jxZl0h

この状態で、「VERITAS Storage Foundation Basic: インストール編」と同様に再インストールします。
再インストールした後確認してみると...
# /opt/VRTS/bin/vxdisk path
SUBPATH                     DANAME               DMNAME       GROUP        STATE
sda                         sda                  -            -            ENABLED
sdb                         sdb                  centos01     centos       ENABLED
ってことで、無事に見えました。
で、見えたらmountすべしという事で、fstabに前回と同じように書き込んで、いざ、mount。
# mount /VxFsVol0
UX:vxfs mount.vxfs: ERROR: V-3-20003: Cannot open /dev/vx/dsk/centos/vol0: そのようなデバイスやアドレスはありません
UX:vxfs mount.vxfs: ERROR: V-3-24996: Unable to get disk layout version
おりゃ、mountできへん。
うみゅ~。
しかし、ぐぐって解決:-)
# /opt/VRTS/bin/vxdg import centos
# /opt/VRTS/bin/vxvol -g centos startall
# mount /VxFsVol0
ってことでmountできるようになります。
で、mount出来たのはよいけど、中身は???ってことで、確認。
# cd /VxFsVol0
# ls
lost+found  vm-rhel5_x86_64-5.0MP3HF3-rpms.tar_308172.gz
# gzip -t vm-rhel5_x86_64-5.0MP3HF3-rpms.tar_308172.gz 
問題ないようです。
なお、/etc/fstabには
# NOTE: When adding or modifying VxFS or VxVM entries, add '_netdev'
# to the mount options to ensure the filesystems are mounted after VxVM and
# VxFS have started.
なんて追記がされているので、素直にmount optionには[default」ではなく「_netdev」を付けましょう:-)
/dev/vx/dsk/centos/vol0	/VxFsVol0	vxfs	_netdev	1 2
みたいな感じ。

お次は、実物使ったテスト環境(実運用しているやつのサブセット... つくづく、自分のアホさを感じる。ふつう自宅の環境でココまでやらないと思うけど...)で確認。
本番環境のupdateまでの道のりは長い...

VERITAS Storage Foundation Basic: 設定編 [VERITAS]

さて、インストールが終わったので、設定です。

まあ、
http://straycats.blog.so-net.ne.jp/2007-01-15-2
に書いた内容をまとめなおしただけのような(^^;

インストールが終わると、/opt以下にインストールされるので、そこに移動します。
# cd /opt
# ls
VRTS       VRTSccg    VRTSfspro  VRTSmh   VRTSperl  VRTSvmpro
VRTSaa     VRTSdcli   VRTSfssdk  VRTSob   VRTSspt   VRTSvxfi
VRTSalloc  VRTSddlpr  VRTSicsco  VRTSobc  VRTSvdid  VRTSvxms
VRTSat     VRTSdsa    VRTSmapro  VRTSpbx  VRTSvlic

まずは、vxdiskで確認です。
# find . -name vxdisk
./VRTS/bin/vxdisk
# ./VRTS/bin/vxdisk path 
SUBPATH                     DANAME               DMNAME       GROUP        STATE
sda                         sda                  -            -            ENABLED
sdb                         sdb                  -            -            ENABLED

今回使うコマンドは、すべて/opt/VRTS/binの下にあります。
ってことで、以下、いちいち調べるのは省略。
お次は、vxdiskadmで管理したいディバイスを管理対象にします。
# ./VRTS/bin/vxdiskadm

Volume Manager Support Operations
Menu:: VolumeManager/Disk

 1	Add or initialize one or more disks
 2	Encapsulate one or more disks
 3	Remove a disk
 4	Remove a disk for replacement
 5	Replace a failed or removed disk
 6	Mirror volumes on a disk
 7	Move volumes from a disk
 8	Enable access to (import) a disk group
 9	Remove access to (deport) a disk group
 10	Enable (online) a disk device
 11	Disable (offline) a disk device
 12	Mark a disk as a spare for a disk group
 13	Turn off the spare flag on a disk
 14	Unrelocate subdisks back to a disk
 15	Exclude a disk from hot-relocation use
 16	Make a disk available for hot-relocation use
 17	Prevent multipathing/Suppress devices from VxVM's view
 18	Allow multipathing/Unsuppress devices from VxVM's view
 19	List currently suppressed/non-multipathed devices
 20	Change the disk naming scheme
 21	Change/Display the default disk layouts
 22	Mark a disk as allocator-reserved for a disk group
 23	Turn off the allocator-reserved flag on a disk
 list	List disk information


 ?	Display help about menu
 ??	Display help about the menuing system
 q	Exit from menus

Select an operation to perform: 1
ここでは「1」の「Add or initialize one or more disks」を選びます。
すると...

Add or initialize disks
Menu:: VolumeManager/Disk/AddDisks

  Use this operation to add one or more disks to a disk group.  You can
  add the selected disks to an existing disk group or to a new disk group
  that will be created as a part of the operation. The selected disks may
  also be added to a disk group as spares. Or they may be added as
  nohotuses to be excluded from hot-relocation use. The selected
  disks may also be initialized without adding them to a disk group
  leaving the disks available for use as replacement disks.

  More than one disk may be entered at the prompt.  Here are
  some disk selection examples:

  sda:		add only disk sda
  sdb hdc:	add both disk sdb and hdc
  xyz_0 :     a single disk (in the enclosure based naming scheme)
  xyz_ :      all disks on the enclosure whose name is xyz

Select disk devices to add: [<pattern-list>,list,q,?] sdb
なんて出てくるので、今回LVMの管理下にないsdbを指定します。

  Here is the disk selected.  Output format: [Device_Name]

  sdb

Continue operation? [y,n,q,?] (default: y) 
間違えてない限り「Enter」を押して、先に進みます。

  You can choose to add this disk to an existing disk group, a
  new disk group, or leave the disk available for use by future
  add or replacement operations.  To create a new disk group,
  select a disk group name that does not yet exist.  To leave
  the disk available for future use, specify a disk group name
  of "none".

Which disk group [<group>,none,list,q,?] (default: centos) 
ここから先は、はいはいはいはい…と進めましょう。

Create a new group named centos? [y,n,q,?] (default: y)

Create the disk group as a CDS disk group? [y,n,q,?] (default: y)

Use a default disk name for the disk? [y,n,q,?] (default: y)

Add disk as a spare disk for centos? [y,n,q,?] (default: n)

Exclude disk from hot-relocation use? [y,n,q,?] (default: n)

Add site tag to disk? [y,n,q,?] (default: n)

A new disk group will be created named centos and the selected disks
will be added to the disk group with default disk names.

sdb

Continue with operation? [y,n,q,?] (default: y)

Initializing device sdb.

Enter desired private region length
[<privlen>,q,?] (default: 65536)

VxVM NOTICE V-5-2-120
Creating a new disk group named centos containing the disk
device sdb with the name centos01.

Add or initialize other disks? [y,n,q,?] (default: n)
これで元のメニュー画面に戻るので「list」で確認してみます。

Select an operation to perform: list


List disk information
Menu:: VolumeManager/Disk/ListDisk

  Use this menu operation to display a list of disks.  You can
  also choose to list detailed information about the disk at
  a specific disk device address.

Enter disk device or "all" [<address>,all,q,?] (default: all) 

DEVICE       DISK         GROUP        STATUS
sda          -            -            online invalid
sdb          centos01     centos       online

Device to list in detail [<address>,none,q,?] (default: none) 
またメニューに戻りますが、今度は「q」で終了します。

お次は、vxassistでディスクグループから領域をを割り当てます。
なお、グループを指定していない場合は、デフォルトグループから割り当てられます。
以下の例では、4GBを「vol0」という名前で割り当てています。
# ./VRTS/bin/vxassist make vol0 4g
# ls -l /dev/vx/rdsk/DGcentos/vol0 
crw-------  1 root root 199, 65534  2月  1 22:36 /dev/vx/rdsk/centos/vol0
# mkfs -t vxfs /dev/vx/rdsk/centos/vol0
    version 7 layout
    8388608 sectors, 4194304 blocks of size 1024, log size 16384 blocks
    largefiles supported


実際に毎回起動時にmountするには、/etc/fstabに書き込みますが、最終行に以下のように追加します。
なおmount pointは「/VxFsVol0」としました。
/dev/vx/dsk/centos/vol0    /VxFsVol0    vxfs    defaults    1 2
ちなみにmountするのはrdskじゃなくてdskの方。
rdskを指定すると、block deviceぢゃない!と怒られます(怒られました(^^;)

で、あとは
# mount /VxFsVol0
# cd /VxFsVol0/
# ls
lost+found
なんて具合にmountするだけです。

さて、これからが、今回の本題ですが、また今度。

VERITAS Storage Foundation Basic: インストール編 [VERITAS]

とりあえず、CentOS 4.xから5.xのUpdateの際に、(うちの場合は)最も問題になるVERITAS Storage Foundation Basicの対応を検証するため、今一度、仮想環境にインストールしてみました。
http://straycats.blog.so-net.ne.jp/2007-01-15-2
にインストールした後の事は、多少書いていますが、まあ、その程度という事で、今回、まじめに記録を取ってみました。

まずは準備。
とりあえず、OSをインストールするディスク以外に、VxVMで管理するディスクを追加します。
OSをインストールする前に用意するなら、LVMの管轄下に入れないように注意しましょう。

お次の準備は、VERITAS Storage Foundation Basic本体。
http://www.symantec.com/enterprise/sfbasic/index.jsp
上記URLにアクセスして、必要事項を入力して、Linux用パッケージを入手します。
RHEL[45]+SUSE{9,10}用の4パッケージが含まれているので、でかいです。
3分割されて配布されているので、くっつけます。

さて、ここで、OSのインストールが終わっていると仮定して、以下、ログ。
なお、ホスト名は「centos」で、FQDNで運用している物とします。
ドメイン名は仮に「YOURDOMAIN」としています。

まずは、tar ballを展開。
# tar xfz sfbasic_5.0.30.0.linux.tar.gz 

終わったら、消しておきましょう。でかすぎるので。
# rm -f sfbasic_5.0.30.0.linux.tar.gz 

でもって、展開されたディレクトリに移動。
# cd dvd3-sfbasic/
# ls
rhel4_x86_64  rhel5_x86_64  sles10_x86_64  sles9_x86_64

SUSEは関係ないので、削除。
# rm -rf sles*

とりあえず、CentOS 4.xへのインストールなのでRHEL4用をインストール。
# cd rhel4_x86_64/
# ls
README_EULA          installer  perl              storage_foundation_basic
getting_started.pdf  installmp  readme_first.txt  windows
# ./installer

インストーラーを起動すると...
                          5.0MP3 Installation Program                          

Copyright (c) 2008 Symantec Corporation. All rights reserved.  Symantec, the
Symantec Logo are trademarks or registered trademarks of Symantec
Corporation or its affiliates in the U.S. and other countries. Other names
may be trademarks of their respective owners.

The Licensed Software and Documentation are deemed to be "commercial
computer software" and "commercial computer software documentation" as
defined in FAR Sections 12.212 and DFARS Section 227.7202.

Logs for installer are being created in /var/tmp/installer-BqXBGR.
こんな画面が出た後...

           Storage Foundation and High Availability Solutions 5.0MP3           

Symantec Product                  Version Installed  Licensed
==============================================================================

Symantec Licensing Utilities (VRTSvlic) are not installed due to which
products and licenses are not discovered
Please use the menu below to continue.

Task Menu:

I) Install/Upgrade a Product                  C) Configure an Installed Product
L) License a Product                          P) Perform a Pre-Installation Check
U) Uninstall a Product                        D) View a Product Description
Q) Quit                                       ?) Help

Enter a Task: [I,C,L,P,U,D,Q,?] I
ま、インストールなので「I」を選択です。

           Storage Foundation and High Availability Solutions 5.0MP3           

Storage Foundation Basic (SF Basic) is the only product available for
installation

Enter the system names separated by spaces on which to install SF Basic: centos
システム名を入れろとの事なので、今回は「centos」を入れる事にします。

Initial system check:

    Checking SF Basic installation on centos ................ not installed
    Checking libaio rpm ......................................... installed
    Checking glibc rpm .......................................... installed
    Checking kernel release on centos .................................. ok
    Checking distribution match with centos ............................ OK
    Checking architecture on centos .................................... OK
    Checking rpm dist match with centos ................................ OK
    Checking for SE Linux on centos .............................. disabled




Storage Foundation and High Availability Solutions 5.0MP3

Checking system licensing

Installing licensing rpms
XXX-XXXX-XXXX-XXXX-XXXX-XXXX-XXX successfully registered on centos



           Storage Foundation and High Availability Solutions 5.0MP3           

Checking installed rpms on centos



           Storage Foundation and High Availability Solutions 5.0MP3           

SF Basic can be installed without optional rpms to conserve disk space.

     1)  Install required Storage Foundation Basic rpms - 385 MB required
     2)  Install all Storage Foundation Basic rpms - 517 MB required

Select the rpms to be installed on all systems? [1-2,q,?] (2) 
ま、全部インストールしましょう、ってことで「Enter」を押してデフォルトの「2」を選択。

           Storage Foundation and High Availability Solutions 5.0MP3           

The following SF Basic rpms will be installed:
VRTSperl          Veritas Perl 5.8.8 Redistribution
VRTSvlic          Veritas Licensing
VRTSicsco         Symantec Infrastructure Core Services Common
VRTSpbx           Symantec Private Branch Exchange
VRTSatClient      Symantec Product Authentication Service Client
VRTSatServer      Symantec Product Authentication Service
VRTSobc33         Veritas Enterprise Administrator Core Service
VRTSob            Veritas Enterprise Administrator Service
VRTSobgui         Veritas Enterprise Administrator
VRTSccg           Veritas Enterprise Administrator Central Control Grid
VRTSmh            Veritas Storage Foundation Managed Host by Symantec
VRTSaa            Veritas Enterprise Administrator Action Agent
VRTSspt           Veritas Software Support Tools
VRTSvxfscommon    Veritas File System Common package
VRTSvxfsplatform  Veritas File System Platform Specific Package
VRTSvxvmcommon    Veritas Volume Manager Common Package
VRTSvxvmplatform  Veritas Volume Manager Platform Specific Package
VRTSdsa           Veritas Datacenter Storage Agent
VRTSfspro         Veritas File System Management Services Provider

Press [Enter] to continue: 
はい、「Enter」を押します。

...continued:
VRTSvmman         Veritas Volume Manager Manual Pages
VRTSlvmconv       Veritas Linux LVM to VxVM Converter
VRTSvmpro         Veritas Volume Manager Management Services Provider
VRTSdcli          Veritas Distributed Command Line Interface
VRTSalloc         Veritas Volume Manager Intelligent Storage Provisioning
VRTSvdid          Veritas Device Identification API
VRTSddlpr         Veritas Device Discovery Layer Services Provider
VRTSfsman         Veritas File System Manual Pages
VRTSfssdk         Veritas File System Software Developer Kit
VRTSfsmnd         Veritas File System Software Developer Kit Manual Pages
VRTSvxmsa         Veritas Mapping Service, Application Libraries
VRTSmaprocommon   Veritas Storage Foundation GUI for Mapping

Press [Enter] to continue: 
はい、ここも「Enter」を押します。

    Checking for patch(1) rpm on centos ........... version 2.5.4 installed
It is possible to install SF Basic rpms without performing configuration.

It is optional to configure SF Basic now. If you choose to configure SF
Basic later, you can either do so manually, or run the installsf -configure
command. The product installation scripts can be found in /opt/VRTS/install
directory

Are you ready to configure SF Basic? [y,n,q] (y) 
心の準備がOKなら、迷わず、そのまま「Enter」を押します。

           Storage Foundation and High Availability Solutions 5.0MP3           

Logs for installer are temporarily being created in
/var/tmp/installer-BqXBGR.



    Installing SF Basic: 0%   ___________________________________________ 
    Installing SF Basic: 3%    __________________________________________ 
    Installing SF Basic: 6%     _________________________________________ 
    Installing SF Basic: 9%      ________________________________________ 
    Installing SF Basic: 12%       ______________________________________ 
    Installing SF Basic: 16%        _____________________________________ 
    Installing SF Basic: 19%          ___________________________________ 
    Installing SF Basic: 22%           __________________________________ 
    Installing SF Basic: 25%            _________________________________ 
    Installing SF Basic: 29%              _______________________________ 
    Installing SF Basic: 32%               ______________________________ 
    Installing SF Basic: 35%                 ____________________________ 
    Installing SF Basic: 38%                  ___________________________ 
    Installing SF Basic: 41%                   __________________________ 
    Installing SF Basic: 45%                     ________________________ 
    Installing SF Basic: 48%                      _______________________ 
    Installing SF Basic: 51%                       ______________________ 
    Installing SF Basic: 54%                         ____________________ 
    Installing SF Basic: 58%                          ___________________ 
    Installing SF Basic: 61%                            _________________ 
    Installing SF Basic: 64%                             ________________ 
    Installing SF Basic: 67%                              _______________ 
    Installing SF Basic: 70%                                _____________ 
    Installing SF Basic: 74%                                 ____________ 
    Installing SF Basic: 77%                                   __________ 
    Installing SF Basic: 80%                                    _________ 
    Installing SF Basic: 83%                                     ________ 
    Installing SF Basic: 87%                                       ______ 
    Installing SF Basic: 90%                                        _____ 
    Installing SF Basic: 93%                                         ____ 
    Installing SF Basic: 96%                                           __ 
    Installing SF Basic: 100%                                              

Installation completed successfully on all systems

The enclosure-based naming scheme is a feature of Veritas Volume Manager. It
allows one to reference disks using a symbolic name that is more meaningful
than the operating system's normal device access name.  This symbolic name
is typically derived from the array name.

Do you want to set up the enclosure-based naming scheme? [y,n,q,?] (n) y
デフォルトは「使わない」ですが、使いましょう。
ってことで「y」。

           Storage Foundation and High Availability Solutions 5.0MP3           


Veritas Volume Manager default disk group name configuration:

Many Veritas Volume Manager commands affect the contents or configuration of
a disk group. Such commands require that the user specify a disk group. 
This is accomplished by using the -g option of a command or setting the
VXVM_DEFAULTDG environment variable.  An alternative to these two methods
for some commands is to configure the name of the default disk group of a
system.

Do you want to set up a default disk group for each system? [y,n,q,?] (y) 
セットアップしちゃうのでデフォルトのまま「Enter」です。

Specify a default disk group name for system centos. [?] centos
名前を入れましょう。
ココでは「centos」です。
まあ、なんでもいいのですが、どーせ家で使う分には、グループを1個ぐらいしか作らないですから、ホスト名と一緒の方が、楽です。

You have decided to specify the default disk group as follows:

    Host: centos ....................................... Disk group: centos

Note: If 'nodg' is displayed, then the host will be configured to have no
default disk group.

Is this correct? [y,n,q] (y) 
良ければ「Enter」で。

           Storage Foundation and High Availability Solutions 5.0MP3           

Verifying the install systems fully qualified hostnames.


    Querying fully qualified domain name of host "centos" .............. ok

Is the fully qualified hostname of system "centos" = "centos.YOURDOMAIN"?
[y,n,q,?] (y) 
ま、FQDNが正しければ、そのまま「Enter」おしましょう。
FQDNで運用していない場合は、知りません。

           Storage Foundation and High Availability Solutions 5.0MP3           

Choose how this install will be managed.

This product can be configured in one of the following two ways:

 	* Veritas Storage Foundation Management Server managed host
		 (Recommended)

 	* Standalone host


 	Pre-requisites for Veritas Storage Foundation Management Server managed
		 host:
 		* A Veritas Storage Foundation Management Server (SFM) is configured
 		* SFM should be currently running and fully operational.
 		* Authentication Broker that is used by SFM should be running.

 	The following information would be requested during configuration:
 		* The host name of the SFM
 		* Previously set SFM agent account password

 	There are no pre-requisites for deploying as a standalone host.

Enabling Veritas Storage Foundation Management Server management simplifies
and improves management of the complex data center resources, reducing
planned and unplanned down time.

Enable Veritas Storage Foundation Management Server Management? [y,n,q] (y) n
ここで、Server Managementを有効にするか聞かれますが、そんな複雑な構成にする訳でも無し、ここは「n」としておきます。

           Storage Foundation and High Availability Solutions 5.0MP3           

Verifying the install systems fully qualified hostnames.

    Configuring VEA in STANDALONE mode on "centos" ..................... ok

    Configuring gridnode on "centos" ................................... ok
    Registering gridnode on "centos" ................................... ok
    Configuring actionagent on "centos" ................................ ok
    Registering actionagent on "centos" ................................ ok
    Registering StorageAgent on "centos" ............................... ok
Do you want to start Storage Foundation Basic processes now? [y,n,q] (y) 
はい、いいですよってことで「Enter」押して進めます。

           Storage Foundation and High Availability Solutions 5.0MP3           

Logs for installer are temporarily being created in
/var/tmp/installer-BqXBGR.



    Starting SF Basic: 0%   _____________________________________________ 
    Starting SF Basic: 6%     ___________________________________________ 
    Starting SF Basic: 12%       ________________________________________ 
    Starting SF Basic: 18%          _____________________________________ 
    Starting SF Basic: 25%             __________________________________ 
    Starting SF Basic: 31%               ________________________________ 
    Starting SF Basic: 37%                  _____________________________ 
    Starting SF Basic: 43%                     __________________________ 
    Starting SF Basic: 50%                        _______________________ 
    Starting SF Basic: 56%                           ____________________ 
    Starting SF Basic: 62%                             __________________ 
    Starting SF Basic: 68%                                _______________ 
    Starting SF Basic: 75%                                   ____________ 
    Starting SF Basic: 81%                                      _________ 
    Starting SF Basic: 87%                                         ______ 
    Starting SF Basic: 93%                                           ____ 
    Starting SF Basic: 100%                                                

/Startup completed successfully on all systems

    Setting default disk group to centos on centos ................... Done
Installation log files, summary file, and response file are saved at:

 	/opt/VRTS/install/logs/installer-BqXBGR

これで、インストールはおしまいです。